Список ошибок отладки cisco iphone

LastOutOfServiceInformation

10 — The TCP connection to the Cisco Unified Communication Manager experienced a timeout error

12 — The Cisco Unified Communication Manager reset the TCP connection

13 — The Cisco Unified Communication Manager aborted the TCP connection

14 — The Cisco Unified Communication Manager closed the TCP connection

15 — The device closed the connection due to a SCCP KeepAlive failure

16  — The connection closed due to the IP address being lost.  This  may be  due to the DHCP Lease expiring or the detection of IP address   duplication.  Check that the DHCP Server is online and that no   duplication has been reported by the DHCP Server.

17 — The device closed the TCP connection due to a registration timeout.

18 — The device closed the TCP connection in order to reconnect to a higher priority Cisco Unified CM

20 — The device closed the TCP connection due to a user initiated reset

22 — The device closed the TCP connection due to a reset command from the Cisco Unified CM

23 — The device closed the TCP connection due to a restart command from the Cisco Unified CM

24 — The device closed the TCP connection due to receiving a registration rejection from the Cisco Unified CM

25 — The device has initialized and is unaware of any previous connection to the Cisco Unified CM

26 — The device closed the TCP connection due to reconfiguration of IP on a new Voice VLAN.

27 — The device closed the TCP connection in order to enter Power Save Plus mode

100 — The device detected a version stamp mismatch during registration Cisco Unified CM.

104 — The device closed the TCP connection to restart triggered internally by the device to apply the configuration changes.

105  — The device closed the TCP connection due to a restart triggered   internally by the device because device failed to download the   configuration or dial plan file.

106 — The device failed to setup a secure TCP connection with Cisco Unified CM

200 — The device was unregistered because the client application was closed.

201 — The device was unregistered because the OS was put in standby mode.

202 — The device was unregistered because the OS was put in hibernate mode.

203 — The device was unregistered because the OS was shut down.

204 — The device was unregistered because the client application crashed.

205 — The device was unregistered in the previous session because the system did not allow sufficient time for cleanup.

206 — The device was unregistered because the client requested to switch from softphone to deskphone control.

207 — The device is being registered because the client requested to switch from deskphone control to softphone.

208 — The device is being unregistered because the client detected a change of network.

209 — The device is being unregistered because the device has exceeded the maximum number of concurrent registrations.

210 — The device is being unregistered because the client has exceeded the maximum number of concurrent logons.

Например

17:01:00 LastOutOfServiceInformation DeviceName=SEP7426ACE902CB DeviceIPv4Address=10.255.8.198 IPv4DefaultGateway =10.255.8.1 DeviceIPv6Address=:: IPv6DefaultGateway=:: ModelNumber=CP-9971 NeighborIPv4Address= NeighborIPv6Address= NeighborDeviceID= NeighborIPortID= DHCPv4Status=1 DHCPv6Status=3 TFTPCfgStatus=1 DNSStatusUnifiedCM1=4 DNSStatusUnifiedCM2=0 DNSStatusUnifiedCM3=0 DNSv6StatusUnifiedCM1=0 DNSv6StatusUnifiedCM2=0 DNSv6StatusUnifiedCM3=0 VoiceVLAN=102 UnifiedCMIPAddress=10.255.8.1 LocalPort=49960 TimeStamp=1429016459 ReasonForOutOfService=10 LastProtocolEventSent=Sent:NOTIFY sip:2663@10.255.8.1:5060 SIP/2.0 Cseq:816 NOTIFY CallId:7AD1127D-E1CC11E4-9960E4BF-C5E9CDC1@10.255.8.1 LastProtocolEventReceived=Rcvd:SIP/2.0 200 OK Cseq:101 REGISTER CallId:7426ace9-02cb0002-3c4be22a-043a8ab4@10.255.8.198

 

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/err_msgs/8_x/ccmalarms802.html#CCM_CALLMANAGER-CALLMANAGER-2-CallManagerFailure


Добавить комментарий

Ваш адрес email не будет опубликован. Обязательные поля помечены *